GOLDRING ELITE

   The Goldring Elite is a high performance low output moving coil cartridge which incorporates Goldring's most recent design features, such as new magnetic circuitry, an ultra rigid Pocan body and a Neodymium magnet.
The Elite features the Gyger I line contact stylus and a symmetrically wound low mass armature from solid silver wire.

   The Elite is one of Goldring's very best phono cartridges. Designed and built in Britain, it represents an exceptionally high standard of performance and reliability.
Standard Mounting Style. Hardware Included.

Price & Purchase

SPECIFICATIONS

• 20-30kHZ
• Force 1.75 Grs.
• 1 Year Warranty
• Stylus Shape and Dimension
• Geiger 1 0.47 x 0.19 x 4.72 mils
• Channel Balance 1dB
• Channel Separation 25 dB
• Output
• 0.5 mV
• Compliance 18 mm/N Lat, 18 mm/N Vert
• Tip Moving Mass
• 0.35 mG
• Standard Mount
• Hardware Incl.
• Cartridge Weight: 5.7 grams
• Shipping Weight 0.5 Lbs

   The ELITE will fit any standard tonearm. Mounting is accomplished with two screws ½" apart. Hardware is included.

   Goldring remains one of the few companies that fit high performance line contact styli to their line of value priced cartridges. The benefit is better highs and less mis tracking.

   The powerful rare earth Neodymium magnet allows for a shortened magnetic path and a concentration of the field at the pole shoe gap. This helps reduce the amount of iron in the cartridge keeping the weight down to a mere 5.7 grams

• 1 Year Warranty
• Standard Mount
• Moving Coil Design
• Solid Silver Wire
• Nude Geiger Elliptical Diamond
• Gold Plated Pins
• Recommended for better turntables

   The really great features to take note of with the Goldrng Elite are, I believe, the unique construction and moving coil sound. The Elite provides performance and construction qualities often reserved for much more expensive designs

   The Elite features a strong, one piece body made from Pocan, an ultra rigid glass-reinforced polyester. All fixed parts can be held securely in place and the body can be tightly bolted to the headshell.

   The Low output of the Elite requires a moving coil input with a gain of about 53dB will yeild good signal to noise ratio. The recommended load resistance is 100 Ohms.