ORTOFON PROFESSIONAL PHONO CARTRIDGES |
|||||||
DJ | Hi Fi |
DJ Products
DJ's
all over the world claim very high demands to their professional equipment,
among which the cartridges ``plays" their decisive part by realising the
scratching, back-cueing, and live artistic performance, as a big part of the
show. Reliability and robustness is vital, when the cartridges night after
night will have to withstand these demands in environments with extreme
soundpressure and vibration.
Scratching and back-cueing impose heavy
mechanical stress on the cantilever and its rubber bearing. Therefore, the
Ortofon disco cartridges are equipped with cantilevers made from aluminium tube
with increased wall thickness. Special attention has also been paid to the
attachment of the bearing and the design of the bearing itself. This means that
rough treatment will neither damage the cartridge nor degrade its stability.
The OrtofonPro cartridges were the first to combine the unrivalled
Ortofon sound quality with the ruggedness that is a must for professional use.
Many years of experience from producing disco cartridges, and a close contact
to DJ's, have resulted in several lines suitable for all tonearms and all
amplifiers.
For easier cueing, the nose of all the Ortofon disco
cartridges has an extra large cut-out which makes the stylus freely visible
from above.
The
original Concorde design is now available from Reloop. However, KAB has a large
stock of original ProS styli available. These are not compatible with the newer
Concorde MKII introduced in 2018
The Ortofon
sound is reknown for tight bass and transparent, low distortion midrange. The
Relooop by Ortofon Concorde can be married with any similar style stylus across
the Ortofon line to acheive any performance standard from scratching to
ultimate audiophile.
KAB ELECTRO ACOUSTICS
P.O.BOX
2922
PLAINFIELD, NJ 07062, USA
PHONE 908-754-1479
FAX
908-222-3442