KAB Electro Acoustics Preserving The Sounds Of A Lifetime

Record
Players

Phono
Preamps

Phono
Cartridges

Needles
Belts

Record
Cleaners

Record
Sleeves

KAB
Cables

Sound
Accessories

Home Page

Info Page

Show Cart

Check Out

Contact Us

Follow @kabelectro On Twitter

Great Cables For Line, Phono And Speaker Connections
Affordable Quality KAB Litz Specialty Phono Cables Tonearm Wire , Parts, Solder Technics SL-1200
Back To 1200 Main Page

KAB is happy to feature the American Recorder Technology, a line of American made interconnect cables that feature super flexible cables and ART's own gold/teflon RCA connectors. Fully copper shielded for use in all interconnect applications including phono.

POP
CLICK FOR ENLARGEMENT
ART Pop cables are the perfect upgrade replacing poor quality factory cables and delivering studio performance at an affordable price. Advanced 3mm coaxial design (Mogami 2947) with spiral shield for maximum flexibility and high quality gold RCA connector. These connectors fit RCA jacks that are no less than 0.55" apart
Capacitance at 1kHz, 20°C 59pF/m(18.0pF/Ft)
0.5 METER GOLD $12.00/PR Click To Buy Now

1.0 METER GOLD $14.00/PR Click To Buy Now

1.5 METER GOLD $16.00/PR Click To Buy Now

2.0 METER GOLD $18.00/PR Click To Buy Now
   
BLUES
CLICK FOR ENLARGEMENT
ART Blues cables are engineered with the right balance of properties for connecting audio equipment at an affordable price. Super flexible OFC wire (20/0.12), assures low capacitance and consistent impedance for uncolored, natural performance.
Capacitance at 1kHz, 20°C 65pF/m(19.8pF/Ft)
0.5 METER GOLD $26.00/PR Click To Buy Now

1.0 METER GOLD $28.00/PR Click To Buy Now

2.0 METER GOLD $32.00/PR Click To Buy Now
   
PC Sound Card and Y Adapters
Generic
Female RCA to Mini Stereo plug.
$3.95
Click To Buy Now
ART Y Adapters
2 Female RCA to 1 Male RCA
$9.95
Click To Buy Now
ART Y Adapters
2 Male RCA to 1 Female RCA
$9.95
Click To Buy Now

Mogami Logo
Mogami W2528 Molded Gold Connectors Back To Top
Mogami #2528
MOGAMI #5 CONNECTORSMogami W2528 is a high quality shielded cable featuring webbed outer insulation and overmolded gold plated connectors. Molded connectors are a good choice if you have found machined connectors to fit too tight on to your equipment. Each wire is only 4 mm wide and very flexible. The 2 channels are webbed together like lamp cord. Perfect for phono and line level connections. 19pF/FT capacitance.
These connectors fit RCA jacks that are no less than 15/32" apart. Available in 1, 3 and 6 foot lengths.
1FT W2528 $16.95/PR Click To Buy Now

3FT W2528 $19.95/PR Click To Buy Now

6FT W2528 $21.95/PR Click To Buy Now

KAB / CARDAS Litz Cables  
Litz Winding Style Litz wire is a type of cable used in electronics to carry alternating current. The wire is designed to reduce the skin effect and proximity effect losses in conductors used at frequencies up to about 1 MHz. It consists of many thin wire strands, individually insulated and twisted or woven together, following one of several carefully prescribed patterns. This winding pattern equalizes the proportion of the overall length over which each strand is at the outside of the conductor. In this way, Litz construction:
  1. Optimizes cable bandwidth
  2. Eliminates individual strand interaction
  3. Eliminates oxidation effects due to aging
  4. Generally optimizes cable performance
  5. Provides peace of mind with regard to signal transfer
KAB SpiralVoice Litz Loudspeaker Cable Back To Top



KAB is pleased to offer our new SpiralVoice loudspeaker cable at a price more audiophiles can afford. We will terminate the cable however you wish using Cardas banana or spade terminals. You can also purchase the wire in bulk, just be sure you know the special requirements of Litz wire. For sonic and value judgements, compare this with Cardas' own TwinLink cables. Read More Here.

The cable will have a black jacket with red and black conductors. All terminals soldered and vinyl sleeve insulated. Bulk is by the foot, be sure to order enough for stereo. Terminated cables come in stereo pairs.
10Ft Stereo Pair - $175.00

Bananas Spades Banana/Spades

Click To Buy Now

Bulk
$8.95/Ft

Click To Buy Now

Cardas Terminals

Bananas(CABE)
Spades(GRS-R)

$11.95 / Pair

Click To Buy Now
KAB / CARDAS Super Flexible Double Litz Interconnects Back To Top
ART POP Connector
Interconnect
This RCA cable is constructed using Cardas special phono cable. This very flexible cablefeatures a rubber jacket, braided sheild and 4 braided teflon insulated center wires all tied together to make one superb signal wire that contains 44 strands of #42 Cardas Litz copper making this perhaps the widest bandwidth interconnect available today. The ground return is through a tightly braided shield for superb noise immunity.
Terminated in high quality RCA Plugs on both ends. Only 3mm wide and very flexible.
Perfect for phono and line level connections. 46pF/FT capacitance.
These connectors fit RCA jacks that are no less than 0.55" apart. Available in 3 and 6 foot lengths. Bulk wire and connectors are available separately.
Choose length, and then select connector style below.

3Ft 6ft


On KAB Gold Over Brass Connectors
3Ft Stereo Pair - $59.95 - 6Ft Stereo Pair - $93.95

Click To Buy Now


On ETI Gold Over Copper Connectors
3Ft Stereo Pair - $99.95 - 6Ft Stereo Pair - $134.95

Click To Buy Now

Bulk
$7.50/FT
Click To Buy Now


3.5mm Connectors

$12/ Pr
Click To Buy Now
KAB / CARDAS "SpiralAir" All Litz Coax Back To Top
KAB/CARDAS ALL LITZ COAX INTEFCONNECT
Interconnect
We call our new premium cable "SpiralAir" because the conductors are sandwiched between a thick layer of air filled cotton and the shield is a unique spiral design. Cotton has a dielectric constant of just 1.3 and that's nearly perfect. Featuring Cardas all Litz coax, it is the only cable, to our knowledge, that uses spiraling litz conductors in the shield as well as the center conductor making this perhaps the best engineered coaxial cable available for audio. Having an outside diameter of 0.180", this very special Cardas cable features golden ratio litz copper center conductor insulated with 0.015" of FEP and double braided cotton filler and a very special Litz spiral shield. Final jacket is 0.025" Blue PVC. 33pF/Ft. Click Here To Read More.
Perfect for the turntable and all line level applications.
These connectors fit RCA jacks that are no less than 0.55" apart. Available in 3 and 6 foot lengths. Bulk wire and connectors are available to the right - Soldering this cable requires special attention
Choose length and then choose connector style below

3Ft 6ft


On KAB Gold Over Brass Connectors
3Ft Stereo Pair - $69.95 - 6Ft Stereo Pair - $89.95

Click To Buy Now


On ETI Gold Over Copper Connectors
3Ft Stereo Pair - $120.00 - 6Ft Stereo Pair - $145.00

Click To Buy Now

Bulk
$4.50/FT
Click To Buy Now


5mm Connectors

$12/ Pr
Click To Buy Now
KAB Internal Turntable Interconnect Cables Back To Top
ART POP Connector
KAB/Cardas super litz
KAB / Cardas Super Flexible Double Litz Interconnects
You choose the best wire for the tonearm, why not continue all the way to the preamp with it!
RCA-Stripped 3.5 Ft. cable is constructed using Cardas special phono cable. Rubber jacket,
braided sheild, 4 braided teflon insulated center conductors tied together to make one super signal wire
that features 24 strands of #45 Cardas Litz copper. Only 3mm wide and very flexible. 140pF total Capacitance.
Terminated in high quality RCA Plugs on one end, stripped and tinned conductors on the other or pre attached to our SL-1200 PC Board with a new ground wire.
This cable is intended to be used when one end is hardwired into a turntable. These connectors fit RCA jacks that are no less than 0.55" apart. [KAB can also terminate these fine cables onto the connectors of your choice, just contact us with your request.] This is one stereo cable set for one turntable.

Stripped/Tinned $54.95Attached To KAB SL1200 PC Board $64.95

Click To Buy Now

KAB/Cardas All Litz Coax Phono Cable
KAB / Cardas SpiralAir Low Capacitance All Litz Coax
Cardas all Litz coax is the only cable, to our knowledge, that uses litz conductors in the shield as well as the center conductor. Having an outside diameter of 0.180". This very special Cardas cable features golden ratio litz copper center conductor insulated with 0.015" of FEP and double braided cotton filler and a Litz spiral shield. Final jacket is 0.025" Blue PVC. By using litz wires in a fully wrapped Reussen shield ensures that the return path matches the center conductors in every way for bandwidth and signal purity. 33pF/Ft.Terminated in high quality RCA Plugs on one end, stripped and tinned conductors on the other or pre attached to our SL-1200 PC Board with a new ground wire. Cable is 3.5 Ft long.
This cable is intended to be used when one end is hardwired into a turntable. These connectors fit RCA jacks that are no less than 0.55" apart. [KAB can also terminate these fine cables onto the connectors of your choice, just contact us with your request.] This is one stereo cable set for one turntable.

Stripped/Tinned $64.95Attached To KAB SL1200 PC Board $74.95

Click To Buy Now


Super Flexible Double Litz DIN to RCA
You choose the best wire for the tonearm, why not continue all the way to the preamp with it!
RCA- Cardas 5 pin DIN 3 Ft. cable is constructed using Cardas special phono cable. Rubber jacket,
braided sheild, 4 separate teflon insulated center conductors paralleled together to make one super fast signal wire
that features 44 strands of #42 Cardas Litz copper.
Terminated in hi quality gold/Teflon RCA Plugs on one end, Cardas DIN on the other. 140pF total Capacitance.
Only 3mm wide and very flexible. These will accommodate RCA jacks spaced as little as 0.55" apart.
.CARDAS PHONO CABLECARDAS PHONO CABLECARDAS 5 PIN DINGold / Teflon RCA
Just
$129.95

Click To Buy Now

Bulk Tonearm Wires, Cable, Connectors and Terminals Back To Top
CARDAS SRCA Cardas SRCA GG
The ultimate RCA plug, non- magnetic, eutectic Brass, Gold plate.
Brass cover, Gold plate. Spring loaded ground . 9.5mm cable opening.
These fit RCA jacks that are 5/8" apart or greater
Just
$12 Ea

Click To Buy Now
ART POP RCA CONNECTORS ART POP RCA Connectors.
These feature gold over brass with Teflon insulator and integrated wire stress relief clamp. 3.5mm center hole is ideal for Cardas Phono cable below. Now available with 5mm hole to accommodate Cardas 1x21 all Litz coax as well as other cables. These connectors fit RCA jacks that are no less than 0.55" apart.
Just
$12/ Pr
3.5mm

Click To Buy Now

5mm

Click To Buy Now
KAB SuperFlex Copper Litz Tonearm Wire KAB SuperFlex Tonearm Wire. NEW!!
Each fine silicone coated wire is made up of 40 strands of 50 Ga. Pure litz copper, 34 Ga total. Sold buy the foot in sets of 4. Coded Red, Green, Blue, and White. You will not find a more flexible tonearm wire. Handles like a wet noodle. It will not bind or cause arm motion due to twisting or insulation tension. Read More.
To order more than one continuous foot, click the buy button and change the QTY to the number of continuous feet you require. Then click "update qty" to lock it in.
$10.00/FT
Set Of 4
Click To Buy Now
 CARDAS PHONO WIRE Cardas Tonearm Wire.
Each fine teflon coated wire is made up of 1 40ga strand with 5 42 Ga. wrapped around it. Pure litz copper, 33 Ga total. Sold buy the foot in sets of 4. Coded Red, Green, Blue, and White.
Order ground wire separately below.
These wires are ofter thinner overall than the wires of the Cardas tonearm cable below.
Info on soldering Cardas Litz. Also see our custom SL-1200 precut and tinned wire set below.

To order more than one continuous foot, click the buy button and change the QTY to the number of continuous feet you require. Then click "update qty" to lock it in.
$7.50/FT
Set Of 4
Click To Buy Now
Cardas Tonearm Black Ground Wire.
This fine teflon coated wire is made up of 1 40ga strand with 5 42 Ga. wrapped around it. Pure litz copper, 33 Ga total. Sold buy the foot. Usually we reccomend using the old ground wires over again, since they have no sonic impact. But just in case you need a black wire, here it is.
To order more than one continuous foot, click the buy button and change the QTY to the number of continuous feet you require. Then click "update qty" to lock it in.
$1.85/FT
Click To Buy Now
Cardas PCC-EG Cartridge  Clips Cardas PCC EG Cartridge Clips
Clips provide a secure connection on a variety of cartridge pin sizes.
Clips are Gold Plated. Set of 4. Complete Cardas headshell wire sets are on the accessories page in the headshell section.
$7.50
Set Of 4
Click To Buy Now
Phono Termiinal Board Brass Terminal Board
5 tin plated brass terminals staked on a phenolic board. Commonly used for point to point wiring in tube gear, these terminal boards make a great interconnection point between fine tonearm wires and the exiting cable. This board also fits inside the SL-1200 cavity as a replacement for damaged PC boards
See how we use it in the SL-1200 here.
SL-1200
Turret Terminal Board $4.95
Click To Buy Now
CARDAS PHONO CABLE Cardas Phono Cable.
Cardas special phono cable. Rubber jacket,
braided sheild, 4 separate teflon insulated center conductors.
Each fine teflon coated wire is made up of 6 strands of 45 Ga. pure litz copper,
33 Ga total. The insulation on these wires is somewhat thicker than the individual spooled wires above. Sold by the foot. This wire tins easily with conventional soldeing irons.
To order more than one continuous foot, click the buy button and change the QTY to the number of continuous feet you require. Then click "update qty" to lock it in.
$7.50/FT
Click To Buy Now
CARDAS COAX 1X21AWG ALL LITZ KAB/Cardas SpiralAir All Litz Coax
Unique cable has an outside diameter of 0.180". 21.5 AWG Cardas golden ratio litz copper conductor insulated with 0.015" of FEP and double braided cotton filler. Litz spiral shield. Final jacket is 0.025" Blue PVC. By using litz wires in a fully wrapped Reussen shield ensures that the return path matches the center conductors in every way for bandwidth and signal purity. 33pF/Ft.
Perfect for longer runs from the turntable and all line level applications.Info on soldering Cardas Litz.
To order more than one continuous foot, click the buy button and change the QTY to the number of continuous feet you require. Then click "update qty" to lock it in.
$4.50/FT
Click To Buy Now
Cardas Quad Eutectic Solder Cardas Solder Quad Eutectic 1 Pound
Carrdas created ultra pure, Quad Eutectic solder for the perfect joining of connector to conductor. Quad Eutectic solder contains a proprietary blend of silver, copper, tin & lead.Quad-Eutectic solder is available on rolls with rosin core.

Outside diameter: 0.032"
1
Pound
Only
$89.00 Ea

Click To Buy Now
     
Cardas Quad Eutectic Solder Cardas Solder Quad Eutectic 100 Gram (3.5 Oz)
Carrdas created ultra pure, Quad Eutectic solder for the perfect joining of connector to conductor. Quad Eutectic solder contains a proprietary blend of silver, copper, tin & lead.Quad-Eutectic solder is available on rolls with rosin core.

Outside diameter: 0.032"
100
Gram
Only
$23.00 Ea

Click To Buy Now
Cardas Solder Quad Eutectic 10 Ft (0.5 Oz) New!
Carrdas created ultra pure, Quad Eutectic solder for the perfect joining of connector to conductor. Quad Eutectic solder contains a proprietary blend of silver, copper, tin & lead.Quad-Eutectic solder is available on rolls with rosin core.

Outside diameter: 0.032"
10Ft

Only
$5.95 Ea

Click To Buy Now
     
Cardas Solder Flux Cardas Solder Flux
Rosin Flux Soldering Paste is available in 2 oz containers.
Helps solder flow smoothly. Great for re flowing solder joints as well.
2 Oz.
Jar
Only
$15.00 Ea

Click To Buy Now
     
Technics SL-1200 Specific Cables Back To Top
SL-1200 M5G Cable
SL 1200 Phono PCB
SL-1200 M5G Close-up Technics Original SL-1210 M5G
Hi Fidelity Cable. Is a beautifully constructed cable featuring OFC conductors, crimped and soldered to fully over molded connectors. The handles are square shaped allowing these connectors to fit onto RCA jacks with spacing as little as 1/2". 45" long. 90pF capacitance. Order stock cable to the right or prewired to PC board with internal ground or with ground wire. Also see our Litz cables above offered with 1200 PCB terminations as well. This is one stereo cable set for one turntable.
Fits all 1200 models from MK2 thru MK6

Custom Terminations Available:
KAB SL1200 PCB $69.95 KAB SL1200 PCB + Ground Wire $74.95

Click To Buy Now

M5G Cable
Only
$32.95 Ea

Click To Buy Now
Mogami #2528
SL 1200 Phono PCB
MOGAMI #5 CONNECTORSMogami W2528
The standard DJ service replacement cable. KAB offers this high quality
cable cable in 45" and 3 ft lengths, preattached to our PC board with internal ground, or with ground wire. Featuring webbed construction and good fitting gold plated connectors. This is one stereo cable set for one turntable.
Fits all 1200 models from MK2 thru MK6

45"Length:
KAB SL1200 PCB $49.95 KAB SL1200 PCB + Ground Wire $54.95

Click To Buy Now

3 Ft Length
KAB SL1200 PCB $42.95 KAB SL1200 PCB + Ground Wire $48.95

Click To Buy Now

Mogami W2528 Stripped and Tinned

45"
$32.95 Ea

Click To Buy Now

36"
$29.95 Ea

Click To Buy Now
KAB/Cardas Tonearm Wire Set SL1200 Arm Wire Set KAB SuperFlex NEW!!
Wire kit includes 4 wires KAB SuperFlex, precut to 10.125", stripped, pretinned. 2 cotton strips are also included. One for each end of the arm wand and our new latex thin walled rubber liner. A fishing wire is also included to help route the wires into the base of the SL1200. Rewiring a 1200 arm is not for the faint of heart. Our custom wire kit will help make the work a little easier. Unlike most other "tonearm" wires offered by others, KAB SuperFlex is so flexible that there is no interference with arm motion. Click here for step by step Rewire Instructions
KAB SuperFlex Wire Set
$28.00
Click To Buy Now
Original SL-1200 Ground wire. 45" long terminated in a spade lug. Stock Ground Wire
$6.50
Click To Buy Now
Phono Termiinal Board Brass Terminal Board
5 tin plated brass terminals staked on a phenolic board. Commonly used for point to point wiring in tube gear, these terminal boards make a great interconnection point between fine tonearm wires and the exiting cable. This board also fits inside the SL-1200 cavity as a replacement for damaged PC boards
See how we use it in the SL-1200 here
SL-1200
Turret Terminal Board $4.95
Click To Buy Now
SL1200 Phono PC Board KAB / SL1200 Phono PCB
Our own reproduction PC board for SL-1200. Better than any other reproduction board for several reasons. We use double sided copper with vias for highest conductivity. Our PCB features an internal ground that properly grounds only the left channel. Others we have seen ground both channels and this can cause hum with certain cartridges - and they cannot be defeated without cutting copper traces. Ours is set with a simple jumper; use it or don't use it.
SL-1200
Phono PCB
$15.00
Click To Buy Now
Phono Jack Plate W/Ground KAB PC-1200
Designed for the SL-1200 table, our jack plate certainly can be used on other tables. Features high quality RCA gold/Teflon jacks and a ground post. In the SL-1200, the plate fits neatly over the left side hinge using the same hardware location. It does not interfere with the dustcover in any way.
SL-1200 RCA Jack Plate
$29.95
Click To Buy
SL-1200 Din Plate KAB SL-1200 DIN Plate
This DIN plate replaced the tonearm cover of the SL-1200 table. Features Cardas DIN jack.
When wiring to this plate, the tone wires need to be 12" as long measured from the headshell socket.
Mates with most DIN cables including our own on this page.
SL-1200 DIN
$69.95
Click To Buy Now
Back To Top